Creating a connection – Sony Ericsson GC75 User Manual
Page 5
5
English
Note: The correct parameters for
connection to the Network
Operator you select from the list
are automatically entered for you.
5. Make sure the correct APN (Access
Point Name) is selected for GPRS, or
the correct telephone number is
entered for CSD/HSCSD.
6. Click Advanced to set specific
parameters if necessary, see GPRS
subscription or CSD/HSCSD
subscriptionfor more details. You
should always specify your preferred
network connection speed and
method of connection for CSD/
HSCSD dial-up connections. Close
the dialog when you have finished
and click Next.
7. If you need a User ID and Password
to log on to your Service Provider
enter them in to the specific fields. If
you don’t, leave the fields blank. Click
Next.
8. Click Finish to create the connection.
GPRS subscription
If your Network Operator isn’t listed you
will need to contact them and obtain the
following parameters. The APN and
username can be entered directly into the
wizard.Click the Advanced... button in
the Connections Wizards APN screen to
enter the DNS:
• APN address for GPRS connection.
• User ID and password, if required
(these are often left blank).
• DNS (Domain Name Server) address,
if required (in most networks this is
server assigned).
CSD/HSCSD subscription
If your Network Operator isn’t listed you
will need to contact them and get the
following parameters. You can specify
these parameters by clicking the
Advanced... button in the Connections
Wizards Telephone Number screen:
• Dial-in telephone number.
• User ID and password, if required.
Creating a connection
GC75_QSG_P1B.BOOK Page 5 Friday, July 30, 2004 8:54 AM