SOYO Super 7 V1.1 - Manual (Page 17)

SY-5EHM/5EH5 V1.x Quick Start Guide
17
The SOYO CD
Please note that if the Start Up program was unable to determine which SOYO Motherboard
you own, the manual selection menu will pop up, as shown below. Then select the user's
manual file that corresponds to your Motherboard model name and click OK.
(Manual Selection Menu)
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In
order to read a PDF file, the appropriate Acrobat Reader software must be installed in your
system.
Note: The Start Up program automatically detects if the Acrobat Reader utility is already
present in your system, and otherwise prompts you on whether or not you want to install it. You
must install the Acrobat Reader utility to be able to read the user's manual file. Follow the
instructions on your screen during installation, then once the installation is completed, restart
your system and re-run the SOYO CD.
Step 3.
Install Drivers and Utilities
The following describes the best way of installing Windows 95 or Windows 98 on your
5EHM/5EH5 V1.x Motherboard:
Ø The following BIOS default settings should not be changed:
1. The ‘OnChip USB Controller’ item under ‘Chipset features Setup’ is set to enabled.
2. The ‘USB Assigned IRQ’ item under ‘PnP/PCI Configuration is set to enabled.
You MUST have these two items enabled for Windows 95/98 to run properly on your system.
Ø Install Windows 95/98
Ø If you installed Windows 95 you will now need to upgrade your USB driver by running the
following program on your Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
SOYO CD Manuals
Please select your manual in the box below
and click OK.
686 boards: 586 boards:
OK Back
5EH V1.0