Speco Technologies HT - INTB8/9/10 - Manual (Page 18)

17
INTENSIFIER
7) INTENSIFIER
Allows you to get clear images with this function under night or low light conditions.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " INTENSIFIER " by the UP or DOWN button.
② SET " INTENSIFIER " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE DC
SHUTTER TYPE
WHITE BAL AWC
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE
INTENSIFIER
NEXT PAGE
EXIT
OFF : Deactivation
AUTO : When your camera is under night or low light conditions,
select this mode. This mode allows the camera to switch
into B/W in low light conditions.
Increasing the amount of intensification results in brighter pictures under
low light conditions, and may increase image lag.
CAUTION
If you press"AUTO" button in the intensifier mode, you can control
the amount of intesification from 2X ~ X128.
Increasing the amount of intensification may cause image noise which is to
be expected as a normal condition.