SMC Networks 16 10BASE-T - Manual (Page 161)

Class of Service Configuration
3-125
3
Web – Click Priority, Queue Scheduling. Select the interface, highlight a traffic class
(i.e., output queue), enter a weight, then click Apply.
Figure 3-75. Configuring Interfaces for Queue Scheduling
CLI – The following example shows how to assign WRR weights to each of the
priority queues.
Console(config)#queue bandwidth 1 6 9 12 4-164
Console(config)#exit
Console#show queue bandwidth
4-167
Queue ID Weight
-------- ------
0 1
1 6
2 9
3 12
Console