Setting up the telephone for use, Connecting the base station – Siemens A110 User Manual
Page 4
4
Setting up the telephone for use
Connecting the base station
◆
Insert the round jack on the mains cable into the socket on the
underside of the base.
◆
Position cable in the cable recess (for strain relief).
◆
Plug the power supply unit into your power outlet.
◆
Insert the square jack on the telephone cable supplied into the socket
on the underside of the base.
◆
Position cable in the cable recess.
◆
Plug the telephone jack into the phone socket.
i
◆
Only use the power supply unit supplied as indicated on the
underside of the device.
◆
If you buy another cable, ensure that it has the correct
assignment.
Germany: 3-4 assignment of telephone lead/EURO CTR37.
◆
Keep the power supply unit plugged in at all times to ensure
your phone is ready for use whenever you need it.
Power supply unit
with mains cable
(220/230 V)
Phone jack with
phone cord
Ontario.fm Seite 4 Freitag, 28. November 2003 2:35 14