Samsung MAX-VL85 - Manual (Page 16)

Disc 1
On/ Standby Timer/ Clock
Timer/ On/Off
AUX Demo
Mute
Phones
Push Eject
Mono/ST
Band Select/
TUNER VCD/CD TAPE
Power Surround
Program
CD Repeat
Shuffle CD Synchro
Reverse Mode
Deck 1/2 Counter Reset
Dubbing
Normal High
Preset
Memory
REC/Pause
AI Sleep
Disc 2 Disc 3 Disc Change Open/Close
R
Volume
Sound Mode
Subwoofer Level
Push Eject
Echo
Mic Mixing
Min Max MIC 1
MIC 2
Enter
Up
Ne xt
Do wn
Pre vious
Preset/Manual
Menu Menu
VCD/CD
Preset/Manual
r
M
In order to playback video VIDEO-CD(‘S), make sure that your
unit is connected to your TV set.
This unit is designed for playback of video CD(‘S), version 1.1 and 2.0.
Only with version 2.0, is it possible to call up the on screen menu
function. This unit will not play back any other video VIDEO-CD(‘S)
other than 1.1 and 2.0 versions.
Turn on the On/Standby switch and set the VCD mode.
Press the Open/Close ( ) button on the unit, to open the CD tray.
Result: “ OPEN ” is displayed and CD tray slides open.
Load a video-CD(’S) with the label facing upwards in the tray.
Press the Open/Close ( ) button again to close the CD tray.
To playback:
In version 1.1, press the button for direct access to the film,
as there is no menu-on-screen.
In version 2.0, load a video CD, “ Video CD2.0 ”, and “ MENU ON ”
are displayed on the TV screen. Press the button and the
menu is displayed on the TV screen.
Select a number from the menu using Digits button on the remote
control or Moving Jog knob and press the VCD/CD( ) button.
To return to the previous menu, press the Return button .
When playing a video-CD(‘S) version 2.0, reading time on the
display may take longer, depending on the disc’s contents.
Press button on the remote control to receive a still picture.
Result: Pause is displayed, a still picture appears and the sound is
muted.
To return to normal playback, press VCD/CD( ) button.
Press the Stop ( ) button to stop playback.
Please make sure that the VIDEO-CD(‘S) to be played is not
flawed optically, as this may cause a distorted sound or the unit to
malfunction.
Video CD Player Playback
1
2
3
4
5
6
7
8
5,6,7
1
2,4
You can find a certain passage faster during playback.
This function is possible in CD or VCD Ver 1.1 or Ver 2.0
menu off mode.
To... Press and hold down...
Scan forwards
Scan backwards
Release the Skip/Search buttons when the desired passage has
been found.
In the video CD version 1.1, where the disc’s contents are over 15
minutes long, you can scan up or down by intervals of five minutes.
To... Press...
Scan forwards by 5 minute intervals
Scan backwards by 5 minute intervals
Result: The picture is still, and the disc’s contents are forwarded or
reversed by 5 minute intervals. Playback then resumes from
this new position.
In the SKIP/SEARCH or SCAN mode, the sound can only be partially
heard and the picture scenes will change sporadically, until the required
passage has been found.
Search Functions
Volume
Tuning
Mode
Volume
PREV NEXT PREV NEXT
1
2
1
8
Please use this function for reproducing a desired track in a
certain time of playback.
Press the Time Search button.
Set a desired time by pressing the Digit buttons.
Press the Play ( ) button.
Time Search Function
(This function is available only during the playback of a CD/VCD)
1 2 3
4 5 6
7 8 9
TAPE
Timer
On/Off AI Sleep Deck 1/2 Counter
Reset
Return CD Repeat
Disc
View
Time
Search
Slow Sound
Key Control Band
Zoom
+10/0 Mono/ST.
VCD / CD
# b
1
2
3
1
2
3
GB
16
MAX-VL85GB-1~18 5/26/03 12:14 Page 16