Stamina Products 15-4525 - Manual (Page 13)

Displays the current speed on upper display from zero to 999.9 miles per hour.
Lower display automatically scans each function of DISTANCE, TIME, CALORIE, and PULSE
in sequence every four seconds. The function mark "
" must appear on display by pressing
the button.
Press the button until "D" appears to display the distance you are traveling, from zero to 9999
miles.
Press the button until "T" appears to display the riding time, from one second up to 23 hours
59 minutes.
Press the button until "C" appears to display calorie consumption, from one to 9999 Kcal.
The Calorie Display estimates the average user's calorie consumption based on the speed
and time of the workout. The Calorie Display is not affected by the load adjustment. It should
be used only as a comparison between workouts on this unit.
Displays your heart rate in beats per minute. To display the pulse readout, press the button
until only the heart symbol "
" is shown on the display. Grasp the Pulse Sensors on both
sides of the handrail, one in each hand. The heart symbol " " will begin flashing when the
meter senses your heart rate. Your heart rate will be displayed approximately five (5) seconds
after the heart icon is displayed. If you do not place your hands correctly and 60 seconds
passes without a heart rate reading, the meter will turn off the heart rate circuit. If this occurs,
press the button to restart, place your hands back on the Pulse Sensors correctly, and the
heart rate readout will appear.
FUNCTION:
USING THE FITNESS MONITOR OR METER
SPEED:
SCAN:
DISTANCE:
TIME:
CALORIE:
PULSE:
Pedal movement or push the Mode Reset button.
Automatic shut off after four minutes of inactivity.
13
If you want to restart and to set all the functions to zero when in use, push the button and hold
it down for three seconds.
HOW TO INSTALL AND REPLACE BATTERY:
Use hand or simple tool to pry the Meter from the side covers.
The Meter operates with two AA batteries (two batteries included).
Refer to the illustration to install or replace the batteries. 1.
2.
Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
Rechargeable batteries are not recommended. 1.
2.
3.
NOTE:
AA Batteries
OPERATIONAL INSTRUCTIONS
FUNCTION MARKS (On The Display) :
M: Speed in Miles Per Hour T : Time
: Scan C : Calorie
D: Distance : Pulse
NOTE:
POWER ON:
POWER OFF: