Technology, Foil and styroflex capacitors, Outputs – Sound Performance Lab 2711 User Manual

Page 15: Channel split

Advertising
background image

RackPack: Preference Mic Pre

15

Foil And Styroflex Capacitors

Only the best MKP and styroflex capacitors are used in the various cir-
cuits. They sound more open and dynamic in contrast to the conven-
tional ceramic capacitors.

Outputs

Both output stages are electronically balanced and can be used inde-
pendently. They are capable of driving very long cables (up to a few
hundred yards, depending on the capacity of the cables and the input
stages on the other end). The maximum output level is +22 dBu.

Channel Split

Since the Preference Mic Pre has two independent outputs, it always
offers you two routes for one input channel.

If, for example, a RackPack is configured as a channel strip, one output
can feed the next module while the second output is used to record
the direct preamp signal.

Another exemplary studio application would be to send one signal
directly into the A/D converter to be recorded in your DAW while the
second signal is used for latency-free monitoring (e.g. cue mix for the
singer).

Capacitors,Outputs, Channel Split

Technology

Advertising