Sony KDS-55A2020 - Manual (Page 50)

Using the Menus
50
KDS-50A2020/KDS-55A2020/KDS-60A2020
3-198-047-11(1)
F:\Worker\SONY SX-A Black\3198047111\040MEN.fm masterpage:3 columns Right
Picture Adjust to increase or decrease picture contrast.
Brightness Adjust to brighten or darken the picture.
Color Temp.
White adjustment Cool Select to give the white colors a bluish tint.
Neutral Select to give the white colors a neutral tint.
Warm 1,2 Select to give the white colors a reddish tint.
Warm 2 gives a redder tint than Warm 1.
Sound Sound Mode Dynamic Select to enhance treble and bass.
Standard Provides standard sound. Recommended for home
entertainment.
Custom Provides a flat response.
Others Auto Adjustment Select to automatically adjust the display position, Phase and Pitch
of the picture when the TV receives an input signal from the
connected PC. Note that Auto Adjustment may not work well with
certain input signals. In such cases, manually adjust the options
below.
Reset Resets the current settings to default values.
Phase Adjust after Pitch to fine tune overall sharpness.
Pitch Adjust uneven sharpness on screen.
✍
For the PC Input Signal Reference Chart, see page 60.
Horizontal Center Allows you to move the position of the picture left and right.
Press
B/b and press to adjust.
Vertical Center Allows you to move the position of the picture up and down.
Press
B/b and press to adjust.
Wide Mode Normal Select to display in the original image size.
Full 1 Select to enlarge the picture to fill the display area,
keeping its original ratio.
Full 2 Select to enlarge the picture to fill the display area.
✍
Wide Mode is available only for signals with a 60 Hz
vertical frequency.
Option Description