Sony PEG-SJ22 - Manual (Page 18)

18
3
Press lightly on the screen with the stylus.
This action is called “tapping.”
The digitizer calibration screen is displayed. The calibration screen aligns
the internal circuitry of your CLIÉ handheld with its touch-sensitive screen
that can detect the task you want to perform when you tap an item on the
screen.
4
Tap the center of the displayed target following the on-
screen instruction.
Also tap the center of the following displayed targets in the lower right
corner and the center of the screen.
Note
If the digitizer is not configured correctly, the
scroll bar may not operate properly, “tapping”
may not work as expected, or other problems
may occur. For re-configuring the digitizer, refer
to “Customizing your Sony CLIÉ™ handheld:
Adjusting the Digitizer” in “Handbook.”
After calibration is complete, a screen for setting the time and date is
displayed.
Press lightly on the
screen (Tap)
b