Standard Horizon Gx5500s - Manual (Page 55)

Page 55 GX5500S
tory.” This directory uses the “Individual Direc-
tory” information.
4. Turn the CHANNEL selector knob to select a
name in the directory, then press the [ENT] key.
5. Press the [ENT] key again to send your posi-
tion to the selected vessel.
6. Press the [CLR] key twice to return to the “ Ra- Ra- Ra- Ra- Ra-
dio Setup dio Setup dio Setup dio Setup dio Setup” menu, then press the [CLR] key
again to return to radio operation.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
1. Press the [CALL(MENU)] key. The “ DSC Call DSC Call DSC Call DSC Call DSC Call
Menu Menu Menu Menu Menu” will appear in the display.
2. Turn the CHANNEL selector knob to select the
“ Pos Report Pos Report Pos Report Pos Report Pos Report.”
3. Press [ENT] key to show the “Position Send
Directory.” This directory uses the “Individual
Directory” information.
4. Turn the CHANNEL selector knob to select
“ Manual Manual Manual Manual Manual,” then press the [ENT] key.
5. Enter the MMSI number (nine digits: first digit
permanently set to “0”) which you want to con-
tact by the keypad, then press the [ENT] key.
6. If a mistake was made entering in the MMSI
number repeat pressing the [H/L] key until the wrong
number is selected, then enter the correct number.
7. When finished entering the MMSI number, press and
hold the [ENT] key.
8. Press the [ENT] key to send your position to the
selected vessel.