Sanyo MCD-ZX541F - Manual (Page 4)

- 3 -
POWER SUPPLY
AC Power
Connect one end of the mains lead to the AC
INPUT ~ socket and the other end to an AC outlet.
Note:
- The installed batteries are automati-
cally disconnected when the mains lead is
connected to the unit.
- The FUNCTION switch is mounted on
the secondary side. The unit is not discon-
nected from mains, even switched off.
Battery power
Installing batteries
Install eight “D/HP2/R20” batteries (not sup-
plied) as shown below.
Caution on batteries
To prevent battery electrolyte leakage, which may
result in injury and damage to the unit or other
objects, observe the following precautions:
1. All batteries must be installed with the proper
polarity (see diagram on the rear of the unit).
2. Do not mix new with old or used batteries.
3. Only use batteries of the same type and
brand.
4. Remove the batteries when they are not to be
used for a long period time.
5. When the batteries have become discharged,
they must be disposed of in a safe manner
which complies with all applicable laws.
6. Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
Adjusting the volume
Turn the VOLUME control.
Bass expander button
Press the BASSXPANDER button to Z ON to
enhance the bass sound.
Surround sound button
Press the SURROUND button to Z ON, a 3
dimensional sound effect is created.
GENERAL OPERATION
Headphones
Connect stereo headphones (not supplied) to the
PHONES socket for monitoring or for private
listening. The speakers are automatically
disconnected when headphones are connected.
- Excessive sound pressure from earphones
and headphones can cause hearing loss.
1. 2. 3.
OPEN
6 5
1
2
7 8
4
3
OPEN
540AU.indd 3 2009.4.8 10:11:12 AM