SVAT Electronics CV503-8CH - Manual (Page 35)

CV503-8CH-19M 32
SVAT ELECTRONICS
now you can see
MAIN MENU
Motion Detection
This menu option allows you to adjust the motion detection settings for each individual camera. The settings you can
adjust include turning motion detection on or off, adjusting the sensitivity of motion detection and designating the
motion detection area.
To change the status of motion detection for each camera:
1. Navigate to and select the “STATUS” drop down list for the camera you would like to turn motion detection on/off.
2. Select “ON” or “OFF” to turn the motion detection on or off.
3. Repeat for all desired cameras.
4. Select “APPLY” to save the changes.
To change the sensitivity of motion detection for each camera:
1. Select the “SENSITIVITY” drop down list for the camera you would like to adjust the motion detection sensitivity for.
2. Select 1 to 4 from the drop down list to adjust the sensitivity. 1 is the lowest sensitivity and 4 is the highest.
3. Repeat for all desired cameras.
4. Select “APPLY” to save the changes.
Motion Detection Menu