Recording from external equipment you are watching, Copying from a camcorder (dvd-r130, r131 only) – Samsung DVDR131 User Manual

Page 43

Advertising
background image

English -

43

R

ecording

5

Press the

REC

button

.

To pause recording

Press the

PLAY/PAUSE(

)

button to pause a

recording in progress.

Press the

PLAY/PAUSE(

)

button again to resume

recording.

You can switch channels by pressing the

PROG

(

/

)

buttons while recording pauses.

To stop recording

Press the

STOP

button to stop or finish a recording in

progress.

When using DVD-RW/DVD-R discs, the message
‘Updating the disc information.
Please wait for a moment.’ is displayed.

Recording from external
equipment you are
watching

Check that the disc has enough available space for the
recording. Adjust the recording mode.

1

Press the

OPEN/CLOSE

button, place a

recordable disc on the disc tray.

2

Press the

OPEN/CLOSE

button to close

the disc tray.

Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 40)

3

Press the

INPUT SEL.

button to select the

input source according to the connection
you made.

The front panel display changes in the following
sequence: (DV input is display only DVD-R130, R131)

PR Number

AV1

AV2

AV3

DV

If you connect a digital camcorder, press the

INPUT SEL.

button to select

DV

.

(See pages 43-44)

4

Press the

REC MODE

button repeatedly,

(or press the

REC MODE

button, then

press the …† button) to select the
recording speed(quality).

SP

LP

EP

XP

Before you start

You can not change the recording mode
while recording or Pause.

Recording will stop automatically if
there is no free space left for recording.

Up to 99 titles can be recorded onto a
disc.

Recording will stop automatically if a
copy protected image is selected.

DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.

Do not use DVD-R authoring discs with
this DVD Recorder.

NOTE

Copying from a
Camcorder (DVD-R130,
R131 only)

You may control the Camcorder using the IEEE1394
(DV) interface.

Check that the disc has enough available space for
the recording. Adjust the recording mode.

1

Press the

OPEN/CLOSE

button, place a

recordable disc on the disc tray.

Before you start

Record Mode

SP (02:12)

01003A-R128,130-XEU_41~48 3/11/06 9:27 AM Page 43

Advertising
This manual is related to the following products: