Samsung DVDR131 - Manual (Page 34)

4 Press the …† buttons to select Video
Output , then press the OK or √ button.
5 Press the …† buttons to select the desired
item, then press the
OK or √ button.
In Component mode, you can set video output to
Progressive(P.SCAN) or Interlace, see page 35.
Available video output jacks are as follow.
Available Video Output Jack
S
ystem Setup
34 - English
You can enjoy high quality image through RGB or
Component video connections.
1 With the DVD Recorder in Stop mode/No
Disc mode, press the
MENU button.
2 Press the …† buttons to select Setup , then
press the OK or √ button.
3 Press the …† buttons to select Video , then
press the OK or √ button.
Video setup menu will be displayed.
Setting up Video Output
Options
Component
Select this when the DVD Recorder is
connected to a TV with Component jack.
RGB
Select this when the DVD Recorder is
connected to your TV using SCART cable.
Component Output
(Y, P B , P R )
AV1 Scart
R, G, B
Composite
X
O
X
O
O
O
(TV in progressive mode)
X
X
X
X
O
X
O
O
O
Composite Video out
S-Video out
Setting mode
RGB Mode
Output jack P.SCAN off mode (Interlace mode) P.SCAN on mode
Component mode
Programme DVD-Recorder
Scheduled Record List √ √
No Disc
Programme
Setup
Setup DVD-Recorder
No Disc
Programme
Setup
System √ √
Clock Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
Install √ √
RETURN OK MOVE EXIT
RETURN OK MOVE EXIT
Video DVD-Recorder
No Disc
Programme
Setup
TV Aspect : 16:9 Wide √ √
3D Noise Reduction: Off √ √
Video Output : RGB √ √
DivX(R) Registration √ √
Component
RGB
RETURN OK MOVE EXIT
Video DVD-Recorder
No Disc
Programme
Setup
TV Aspect : 16:9 Wide √ √
3D Noise Reduction: Off √ √
Video Output : Component √ √
DivX(R) Registration √ √
RETURN OK MOVE EXIT
01003A-R128,130-XEU_18~40 2/20/06 7:48 PM Page 34