Specialized Roval Rapide Wheelset None - Manual (Page 3)

3
3
GREA
SE
GREA
SE
GREA
SE
GREA
SE
GREA
SE
GREA
SE
HIGH FLANGE HUB MAINTENANCE - ASSEMBLY / DISASSEMBLY
4
Recommended Torque:
80 in-lbf (9.0 N-m)
Maximum Torque:
90 in-lbf (10.2 N-m)
ADDITIONAL MAINTENANCE INFO:
FRONT HUB: The steps are the same as the rear hub, without the parts specific to the cassette body ( axle, 2 bearings, 2 axle caps).
AXLES: Front and rear Star Hub axle extraction requires removal of the hub bearings, due to the axle flanges between the hub bearings.
This service should be performed by an authorized Roval service center.
For additional information on Roval wheel service for spoke repair/replacement, bearing, cassette body or rim replacement, please con-
tact your local Specialized dealer, or the Specialized Customer Service department, e-mail at [email protected] or call
(877) 808-854.
Bearing
surfaces
Axle Cap
Threads
Bearing
surfaces
Seal and pawl
mechanism
NOTE: Use a low viscocity grease
5mm
Allen key
5mm
Allen key