Speco Technologies DVR-PC8 Series - Manual (Page 66)

66
6.9.2. Notify by E-mail When Sensor Event Occurs
When this box is chosen, e-mail will be sent to the mailbox when there is
sensor event.
DVR Location
Input the name of the DVR
Send To
Input the address of the recipient. Then, the e-mail will be sent to the first
address and the e-mails from second address will be sent to BCC(Blind
Carbon Copy).
Attach Screen
Set to change the image of frame to JPG format before attaching the image.
File may not be attached and only the sensor alarm may be sent when the file
is protected with password.
Total images attached will be [Before Sensor + After Sensor + 1 (while sensor
event)].
1. Before Sensor: From the beginning of sensor alarm, set the frames for
images those are recorded previously.
2. After Sensor: From the beginning of sensor alarm, set the frames for
images those are recorded later.
3. When both “Before Sensor” and “After Sensor” items are 0, only the first
frame of the sensor activation period will be attached.
Setting E-mail
1. Address of the Sender: Input the address of the sender. Input the mail
address according to “Host Server Address”.
2. Host Server Address: Input the server address.
Require Authentication
According to the type of the server, the server will require authentication.
When the server require authentication, select “Need Authentication” box and
fill in “User ID” and “Password” category.
E-mail Test
Send e-mail for test.