Sony BDP-S790 - Manual (Page 34)

34
Dolby Digital / DTS
Downmix PCM: Converts to output
Linear PCM signals. Select this
when connecting an audio device
without a built-in Dolby Digital/
DTS decoder.
Bitstream: Select this when connecting
an audio device with a built-in
Dolby Digital/DTS decoder.
DTS Neo:6
Cinema: Outputs the simulated multi-
channel sound from 2 channel
sources via the HDMI OUT jack
according to the capability of the
connected device using [DTS Neo:6
Cinema] mode.
Music: Outputs the simulated multi-
channel sound from 2 channel
sources via the HDMI OUT jack
according to the capability of the
connected device using [DTS Neo:6
Music] mode.
Off: Outputs the sound with its original
number of channels via the HDMI
OUT jack.
Audio DRC
Auto: Performs playback at the dynamic
range specified by the disc (BD-
ROM only). Other discs are played
back at the [On] level.
On: Performs playback at a standard
compression level.
Off: No compression works. A more
dynamic sound is produced.
Downmix
Surround: Outputs audio signals with
surround effects. Select this when
connecting an audio device that
supports Dolby Surround (Pro
Logic) or DTS Neo:6.
Stereo: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does
not support Dolby Surround (Pro
Logic) or DTS Neo:6.
BD/DVD Viewing
Settings
BD/DVD Menu Language
Selects the default menu language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language
Code], the display for entering the
language code appears. Enter the code
for your language by referring to
“Language code list” (page 47).
Audio Language
Selects the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the
language given priority in the disc is
selected.
When you select [Select Language
Code], the display for entering the
language code appears. Enter the code
for your language by referring to
“Language code list” (page 47).
Subtitle Language
Selects the default subtitle language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language
Code], the display for entering the
language code appears. Enter the code
for your language by referring to
“Language code list” (page 47).