Smeg SCP108SG User Manual
Smeg Microwaves
31
Table of Contents
INSTRUCTIONS FOR THE USER: these provide recommendations for
use, a description of the controls and the correct procedures for cleaning
and maintaining the appliance
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified engineer who is to install, commission and test the appliance
1.
PRECAUTIONS FOR USE ......................................................... 32
2.
DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY33
3.
SAFETY PRECAUTIONS ........................................................... 34
4.
GET TO KNOW YOUR OVEN.................................................... 35
5.
BEFORE INSTALLATION........................................................... 35
6.
DESCRIPTION OF FRONT PANEL CONTROLS ...................... 36
7.
USING THE OVEN ..................................................................... 38
8.
ACCESSORIES AVAILABLE...................................................... 45
9.
RECOMMENDED COOKING TABLES ...................................... 46
10. CLEANING AND MAINTENANCE .............................................. 49
11. EXTRAORDINARY MAINTENANCE .......................................... 54
12. INSTALLING THE APPLIANCE.................................................. 57
Document Outline
- 1. PRECAUTIONS FOR USE
- 2. Disposal instructions - Our environment policy
- 3. SAFETY PRECAUTIONS
- 4. GET TO KNOW YOUR OVEN
- 5. BEFORE installation
- 6. DESCRIPTION OF FRONT PANEL CONTROLS
- 7. USING THE OVEN
- 7.1 Precautions and General Advice
- 7.2 Operating modes
- 7.3 First use
- 7.4 Selecting the function
- 7.4.1 Cooking with preset temperature
- 7.4.2 Changing the preset temperature
- 7.5.1 Timed cooking with minute minder
- 7.5.2 Semiautomatic cooking
- 7.5.3 Automatic cooking
- 7.6 Secondary menu
- 1 Set the time shown on the display (DSP1).
- 2 (P1: OF / ON) Activate or deactivate the child safety lock (); this function locks out all the functions and knobs after 2 min...
- 3 (P2: OF / ON) Activate or deactivate the Show Room function, which disables all the heating elements so that only the control panel works. To allow the oven to be used normally, P2:OFF must be set.
- 4 (P3: OF / ON) Activate or deactivate the function which limits the maximum power absorption to 2300 W.
- 7.6 Secondary menu
- 7.6.1 Modifying the secondary menu settings
- 8. ACCESSORIES AVAILABLE
- 9. Recommended cooking tables
- 10. CLEANING AND MAINTENANCE
- 10.1 Cleaning stainless steel
- 10.2 Routine daily cleaning
- 10.3 Food stains or spills
- 10.4 Cleaning the oven
- 10.5 Cleaning the door glazing
- 10.6 Pyrolysis: automatic oven cleaning
- 10.6.1 Before starting the automatic cleaning cycle
- 10.6.2 How the automatic cleaning cycle works
- 10.6.3 Setting the cleaning cycle
- 11. EXTRAORDINARY MAINTENANCE
- 12. INSTALLING THE APPLIANCE