Samsung 151MP - Manual (Page 31)

English 29
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”.
PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You
use a software utility installed on your computer to set up this feature. See Table 2 below for
details.
Table 2. Power-saving modes
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
This monitor is EPA E NERGY S TAR
®
compliant and NUTEK/ENERGY2000 compliant when used
with a computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when you are not using it or when leaving it
unattended for long periods.
State
Normal
Operation
Power-Saving Function mode
(EPA/ NUTEK/ ENERGY2000)
Standby Mode
Sleep Mode
Position A1
Deep Sleep Mode
Position A2
Horizontal Sync
Vertical Sync Active
Active Inactive
Active Active
Inactive Inactive
Inactive
Power
Indicator
Green Amber
Amber Blinking
(0.5 sec interval) Amber Blinking
(1 sec interval)
Power
Consumption
151MP :
40W (Max.)
171MP :
52W (Max.)
Less than 3W Less than 3W Less than 3W
Appendix
4_E151MP171MPbody.fm Page 29 Friday, September 7, 2001 3:04 PM