Samsung DVD-V3300 - Manual (Page 14)

27 26
To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Subtitle Language will automatically be set to the language you
choose.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD”
then press the ENTER button.
3 Select “Language”
Move the selection bar to “Language” then press ENTER to select.
4 Select “Subtitle”
Highlight “Subtitle”, then press the ENTER button.
5 Set “Subtitle Language” Preference
Highlight your preferred language for subtitles, then press the
ENTER button.
Subtitle Language
Subtitle
Subtitle Language
Automatic
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
3 Select “Audio”
Highlight “Audio”, then press the ENTER button.
4 Set “Digital Output”
Highlight “Digital Output” then press the RIGHT button to select
one of the following options:
• PCM - To use your DVD/TV with an A/V receiver without a
Dolby Digital decoder.
• Bitstream – To use your DVD/TV with an A/V receiver with a
Dolby Digital decoder.
Digital Output
PCM Down Sampling : On
PCM
Bitstream
Language : English
Front Display : Auto
Auto Power Off : Off