Smeg SGR30 - Manual (Page 6)

18
INSTALLATION
TECHNICAL DATA FOR INSTALLERS
Installation and maintenance listed in this section
must only be carried out by qualified personnel
(law n° 46 and D.P.R. 447).
A faulty installation can cause damage to
persons, animals or objects, towards whom the
manufacturer cannot be held responsible.
The cut-off or automatic control devices of the
appliance can only be modified by the
manufacturer or by a duly authorized supplier.
3) INSTALLING THE BARBECUE
Take the barbecue out of its packaging, unpack
the various loose parts, then make sure it is not
damaged. In case of doubt do not use the
appliance and contact a qualified technician.
Packaging (cardboard, bags, expanded
polystyrene, nails...) must not be left within
children's reach as they are potential sources
of danger.
An opening in the table top of the piece of modular
furniture must be made with the dimensions
indicated in fig. 2, making sure that the dimensions
of the space required to install the appliance are
observed.
This is a Class 3 appliance and is therefore
subject to all the requirements set by the
standards for these appliances.
FIG. 2 FIG. 3