Sunwave Tech. REMOTECOMM SRC-7000 - Manual (Page 12)

SRC-7000 User’s Manual
8
Select the item you want to do, and click the button
• New default VMCF file
If you are configuring your SRC-7000 for the first time, you will
probably want to modify the new default VMCF file by selecting
this item.
• Open an existing VMCF file
If you have a saved version of the active VMCF file on your hard
disk, you can modify that and then upload to the remote control.
If you choose to open an existing VMCF file stored on your PC,
you will have to browse to where you saved it.
• Download from remote control
If you are already using your SRC-7000 and need to modify the
VMCF file in the remote control, connect the SRC-7000 to the PC.
See Connecting the SRC-7000 to a PC on page 10. When you
click the
button, a status bar indicates the download
progress.
Select the item you want, and click the
button. See
Chapter 6 Communications on page 44 for more information
about connecting and downloading from the remote control.
If you choose to open New default files, the following screen
appears.