Sharp HT-SL75 - Manual (Page 11)

E-10
2011 October 7 HT-SL70 / HT-SL75 ZB042
Installation image:
Place the system as shown.
Remove the protective film covering the sound bar and
subwoofer before using the system.
Notes:
● As the sound from the system is omni-directional, you
can place the speaker anywhere you like. However, it is
recommended to place it as close to the TV as possible.
● The front panel of the speaker is not removable.
Caution:
Do not change the installation direction when the unit is
turned on.
Placing the system
ACTIVE SUBWOOFER SYSTEM HT-SL70
TV
BD Player DVD player
Place the stand as shown.
Placing the stand
ACTIVE SUB WOOFER SYSTEM HT-SL70
SUBWOOFER SYSTEM ACTIVE SUBWOOFER SYSTEM HT-SL70 Stand
Make sure to unplug the AC power cord before making any connections.
System connections
R L
Subwoofer
Sound Bar
Right
AC outlet
AC 120 V ~ 60 Hz
Left
White
Red
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Speaker connection
Connect the wire without insulation tube to the minus (–)
terminal, and the wire with red and white insulation tube to
the plus (+) terminal.
Caution:
● Use speaker with an impedance of 3 ohms or more, as
lower impedance speaker can damage the unit.
● Do not make a mistake when
connecting the right and left
speakers. The right speaker is the
one on the right side when you face
the unit.
● Do not let the bare speaker wires
touch each other.
● Do not allow any objects to fall into or
to be placed in the bass reflex duct.
● Do not stand or sit on the subwoofer/sound bar. You
may be injured.
INCORRECT