Sunbeam EM0450 - Manual (Page 10)

8
Care and Cfeaning (continued)
3. Press and hold down the ‘UNLOCK’ button
at the rear of the motor base and with
the other hand turn the grind adjustment
collar anti-clockwise until it stops and the
graphic line on the collar is aligned with
the line on the motor base, see figure 7.
4. Lift out the top burr from the grind
adjustment collar using the handle, see
figure 8. Clean using the burr-cleaning
brush.
5. Lift the grind adjustment collar away from
the motor base and clean with the brush,
see figure 9.
6. Clean the bottom burr using the burr-
cleaning brush, see figure 10.
7. Once both burrs are cleaned, return the
grind adjustment collar to its position in
the motor base.
8. With the grind adjustment collar in hand
align the graphic line on the collar with the
line on the rear of the motor base, press
down.
Figure 7
Figure 10