SUPER MICRO Computer Supero SC512 - Manual (Page 37)

5-7
Chapter 5: Chassis Setup and Maintenance
5-6 Installing the DVD or CD-ROM Drive
Replacing the DVD or CD-ROM
Place the DVD-ROM or CD-ROM drive in the chassis above the hard drive. 1.
Secure the drive with two screws. One screw is external. The other screw is 2.
internal.
Figure 5-7: Replace the DVD-ROM/CD-ROM Drive
Replace these screws
DVD-ROM/CD-ROM
Drive
Hard Drive
Flat head
M4 x 4 mm
[0.157]
RAIL
Round head
M4 x 4 mm
[0.157]
Flat head
M5 x 12 mm [0.472]
Washer for M5
DVD-ROM CD-ROM FLOPPY DRIVE
Flat head
6-32 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
M/B
Flat head
6-32 x 5 mm
[0.197]
HARD DRIVE
Thumb screw
6-32 x 5 mm [0.197]
M/B standoff
6-32 to 6-32
M/B STANDOFF
M/B (CPU) standoff
M5 to 6-32
Round head
2.6 x 5 mm
[0.197]