Sony BDV-EF200 - Manual (Page 55)

Ad
dit
iona
l Inf
o
rma
tion
55 GB
Tuner
Playback
There is no sound from the TV
via the HDMI (OUT) jack when
using the Audio Return Channel
function. • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
(page 49). Also, set [Audio Return Channel] in [HDMI Settings] of [System
Settings] to [Auto] (page 49).
• Make sure that your TV is compatible with the Audio Return Channel function.
• Make sure that an HDMI cable is connected to a jack on your TV that is
compatible with the Audio Return Channel function.
The system does not output
sound correctly when connected
to a set-top box. • Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]
(page 49).
Severe hum or noise is heard. • Move your TV away from the audio components.
• Clean the disc.
The sound loses stereo effect
when you play a CD. • Select stereo sound by pressing (page 32).
Distortion occurs in the sound of
a connected component. • Reduce the input level for the connected component by setting [Attenuate -
AUDIO] (page 47).
Symptom Problems and solutions
Radio stations cannot be tuned
in. • Check that the antenna (aerial) is connected securely. Adjust the antenna
(aerial) or connect an external antenna (aerial) if necessary.
• The signal strength of the stations is too weak (when tuning in with automatic
tuning). Use manual tuning.
Symptom Problems and solutions
The disc does not play. • The region code on the BD/DVD does not match the system.
• Moisture has condensed inside the unit and may cause damage to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
• The system cannot play a recorded disc that is not correctly finalized (page 58).
File names are not displayed
correctly. • The system can only display ISO 8859-1-compliant character formats. Other
character formats may be displayed differently.
• Depending on the writing software used, the input characters may be displayed
differently.
A disc does not start playing
from the beginning. • Resume play has been selected. Press OPTIONS and select [Play from start],
then press .
Playback does not start from the
resume point where you last
stopped playing. • The resume point may be cleared from memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the unit.
The language for the soundtrack/
subtitle or angles cannot be
changed. • Try using the BD’s or DVD’s menu.
• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or
DVD being played.
Bonus contents or other data that
are contained in a BD-ROM
cannot be played. • Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
reconnect the USB device (page 26). 4 Turn the system on. 5 Insert the BD-
ROM with BONUSVIEW/BD-LIVE.
Symptom Problems and solutions