Siemens 2602 User Manual
Page 7
2-2
duplex and only supports MDI-X pin signals. Consequently, you will have to use either a straight-
through or crossover cable, depending on the port type used with the modem.
Figure 2-1. SpeedStream 2602 DSL/Cable Router
Table 2-1. SpeedStream 2602 Unit Components
Item
Description
Reset Button
Resets the power and restores the default factory settings.
LEDs
Power, WAN and LAN port status indicators.
LAN Ports
Fast Ethernet ports (RJ-45). Connect devices on your local area network to these ports
(such as a computer, hub or switch).
WAN Port
WAN port (RJ-45) to connect your xDSL/cable modem or Ethernet router.
Power Inlet
Connector for the included power adapter.
Caution: The included power adapter is DC 5V/2.4A. Using the wrong type of power
adapter may cause damage.