Sanyo ECJ-HC100H - Manual (Page 11)

11
Check that the current time is on the display.
The rice cooker uses a 12-hour clock.
Rice cooking will be finished at a specific time when using Timer Cooking.
Two times may be programmed using Timer Cooking.
1
• If the clock has not been set to the correct time, Timer
Cooking may not function properly.
• Timer Cooking will not work when the COOK / START lamp
or KEEP WARM lamp is on. Press the KEEP WARM/OFF
button to turn off the COOK / START lamp.
After selecting the type of rice by pressing the
MENU button, press the TIMER button.
2
• The TIMER lamp and display will begin flashing.
• Two times may be programmed using TIMER 1 and TIMER 2:
Each time the TIMER button is pressed, the display will
alternate between TIMER 1 and TIMER 2.
Select the desired timer.
• Do not use Timer Cooking to prepare BROWN,
SPROUTED BROWN, HAIGA, RINSE-FREE rice or when the
rice has seasoning or ingredients like MIXED or SWEET.
The ingredients might sour or the rice might not be able to
be cooked because of the seasoning sedimentation.
TIMER COOKING
Select the time you would like the rice cooking
to be completed.
3
• Set the cooking timer using HRS button and MIN button.
• HRS button can be set in 1 hour increments.
MIN button can be set in 10 minute increments.
• Timer cooking should begin within 12 hours.
• The cooked rice using Timer Cooking might be soft or
slightly scorched.
Clock time is
correct.
flash flash
TIMER 1 6:00 am TIMER 2 6:00 pm
Press the COOK / START button.
4
• The TIMER lamp will stop flashing and the display
will show the completion time.
• When cooking starts, the TIMER lamp turns off
and then the COOK lamp turns on.
light
Example
When timer
setting is WHITE and
REGULAR for 6:30am.
ECJ_HC RiceCookerManual.qxd 6/7/07 9:50 AM Page 11