Sony SLV-D900E - Manual (Page 54)

54 A/V Receiver hookup
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
and
.
∗
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “Audio Setup” (page 56). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to “MPEG” (page 56). Otherwise, no sound or a
loud noise will come from the speakers.
B-1
B-2
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
B-2
B-1
VIDEO
AUDIO
R
L
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having a
decoder
Subwoofer Center
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
and
Coaxial digital cord
(not supplied)
l : Signal flow
Stereo audio cord
(supplied)
(red) (white)
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
or
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting