Speed Queen LTS95A - Manual (Page 13)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
11 801562
3. Load clothes into wash drum. Refer to section on
Load Sizes.
4. Close the loading door tightly. The washer will
not operate with the loading door open.
5. Set WASH/RINSE temperatures.
There are five (four) WASH/RINSE temperatures
available – Boosted Hot Wash/Cold Rinse (some
models), Hot Wash/Cold Rinse, Warm Wash/Cold
Rinse, Warm Wash/Warm Rinse, and Cold Wash/Cold
Rinse.
Refer to the Available Water Temperatures section
for the temperature that works best for your garments.
6. Select EXTRA RINSE if desired.
The extra rinse control is useful for detergent
sensitive skin. By pressing the EXTRA RINSE to
ON, the REGULAR, PERMANENT PRESS,
and DELICATE cycles will each provide an
additional rinse. If the extra rinse is desired, press
the switch to ON. When the extra rinse is not
wanted, OFF should be selected.
7. Select the cycle according to the type of fabric
being washed. Use the indicator dot on the knob
as a guide.
H378I
H379I
FLW2004N
To reduce the risk of serious injury, do not
bypass the loading door switch by
permitting the washer to tumble or spin with
the loading door open.
W095
WARNING
W547I
FLW1996N
Window may be hot in the Boosted Hot and
Hot wash cycles.
W325
WARNING
CYCLE SELECTION
REGULAR
PERMANENT PRESS
DELICATE
OFF
SPIN ONLY
RINSE & SPIN
3 8 9 1 W 0 8