Samsung C4235(P) - Manual (Page 28)

2
Even in the Night mode, you can see colour images in bright
illumination. Therefore, you can select any of [COLOR…] and [BW…].
In case of [COLOR…], you have to set the colour temperature for white
balance. You can also specify the settings for red and blue colours on
your own. In case of [BW...], the burst signals are output with the BW
Composite Video signals, when the BURST is set to [ON]. And no burst
signals are output when the BURST is set to [OFF].
Note
When it is set to [NIGHT], [WHITE BAL] of the video set will be
displayed as “---“. You cannot adjust the settings manually.
When it is set to [COLOR] in the NIGHT mode, the white balance
will be setting as the same value in [COLOR] mode.
AUTO…
This automatically converts the Day mode to the Night mode and
vice versa depending on illumination. In low illumination, it removes
the IR filtering function to raise the sensitivity. Otherwise, it activates
the IR filtering function to lower the sensitivity.
If you press the SETUP switch when the [AUTO…] submenu is
selected, the corresponding screen appears.
(AUTO)
LEVEL. (.0).I.�.�.�.�.�.�.
DAY..NIGHT . ........ 2.S
NIGHT..DAY . ...... 5.S
RET
(BW)
BURST OFF
RET
(COLOR)
WHITE BAL ATW2
RET
SCC-C4333_Eng-EURO.indd 28 2007-11-12 오전 10:18:27