Sharp XL-ES50 User Manual
Page 11
11
XL-ES5
XL-ES50
P
reparati
on f
o
r Use
FM/AM loop antenna connection
Connect the FM/AM loop antenna to the ANTENNA jack.
Position the FM antenna wire and rotate the AM loop antenna for
optimum reception. Place the AM loop antenna on a shelf, or attach
it to a stand or a wall.
Notes:
z
Placing the antenna on the stereo system or near the AC power
cord may cause noise pickup. Place the antenna away from the
stereo system for better reception.
z
Do not connect the attached FM antenna to an external antenna
as this may cause trouble.
Installing the AM loop antenna:
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
< Assembling >
< Attaching to the wall >
Wall Screws (not supplied)
z
Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
z
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
z
Do not let the bare speaker wires touch
each other.
z
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z
Do not stand or sit on the speakers. You may
be injured.
Incorrect
Red
Black
Front speaker
(right)
Subwoofer
Front speaker
(left)