SOYO SY-7VMA-B - Manual (Page 17)

SY-7VMA-B Quick Start Guide
17
SOYO Wizard
on Hand Utility
Ø Step
This sets the value (in Mhz) to increment when using “Auto determine max. frequency of
the system”, the value of 1 is 0.4 MHz, so if you have set the step to to 3, the system will
increment 1.2 MHz at a time.
Ø Direct Jump
If enabled, the system will increment 4 MHz at a time.
Ø Unit
¡ X FSB
Overclocking the system by changing the FSB frequency, these are for users who have
some knowledge in overclocking.
¡ X CPU
Overclocking the system by directly changing the CPU frequency to the desired speed.
This is for users who are not familiar with the ratio of the CPU.
Ø Test
# of testing
set the number of time the utility will test the system after overclocking. This setting is only
valid when using “Auto determine max. frequency of the system”
# of globe
set the number of display windows while the utility is testing the overclocked system. This
setting is only valid when using “Auto determine max. frequency of the system”
Ø Startup
Load the saved overclocked FSB setting on the system during startup.