Siemens PPX:5056860 - Manual (Page 2)

2
Compatibility Issues
Before installing the PPX:505–6860 converter,
ensure that your system hardware is
compatible with the PPX:505–6860, as defined
below:
Compatibility with Bases
The PPX:505–6860 RS-485/RF converter can be
installed in the following type of bases:
•
PPX:505–6504 4-slot base
•
PPX:505–6508 8-slot base
•
PPX:505–6511 11-slot
dual media base
•
PPX:505–6516 16-slot base
Compatibility with CPUs
The PPX:505–6860 RS-485/RF converter is
compatible with firmware Rel. 3.0 or later in
the following CPUs:
•
PPX:545–1102
•
PPX:555–1101
•
PPX:555–1102
•
PPX:575–2102
•
PPX:575–2103
Compatibility with Power Supplies
The PPX:505–6860 RS-485/RF converter can be
powered by the following supplies:
•
PPX:505–6660 115/230 VAC
•
PPX:505–6660A 115/230 VAC
(dual media compatible)
•
PPX:505–6663 24 VDC
(dual media compatible)
Compatibility with Remote Bases
The PPX:505–6860 RS-485/RF converter is
compatible with bases controlled by the
following Remote Base Controllers (RBCs):
•
PPX:505–6850 RF RBC
•
PPX:505–6850A RF RBC
(dual media compatible)
•
PPX:500–2112 RF RBC
•
PPX:500–2114A RF RBC
(dual media compatible)
•
PPX:500–9912 RF RBC
(dual media compatible); cannot use dual
media with this unit, replace it with a
PPX:500–2114A.
NOTE: The RBC must have firmware Rel. 3.0 or
later if you use the dual media option or RBE
function.