Seiko V072 - Manual (Page 14)

14
English
NOTES ON USING THE WATCH
TIME/CALENDAR SETTING
[CALENDAR SETTING]
● The calendar automatically adjusts for odd and even months except February of leap years.
● The flashing digits move quickly if button C is kept pressed.
● If the watch is left untouched in the CALENDAR SETTING display with the digits flashing, it will
automatically return to the CALENDAR mode in 1 to 2 minutes.
[DIGITAL TIME SETTING]
● The flashing digits except the seconds and the 12-/24-hour indication move quickly if button C is kept
pressed.
● In setting the seconds, when the seconds read any number from “30” to “59” and button C is pressed,
one minute is added and the seconds are reset to “00”.
● Changeover between 12- and 24-hour indications is made alternately with each press of button C.
● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set. Only “PM”
mark is displayed. For the AM setting, there is no indication.
● If the watch is left untouched in the TIME SETTING display with the digits flashing, it will automatically
return to the TIME mode in 1 to 2 minutes.
[ANALOGUE TIME SETTING]
● When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
● When the crown is pulled out or pushed in for time setting, the minute hand may move slightly.
However, this is not a malfunction.