Siemens SX66 - Manual (Page 100)

SX66 Phone User Manual 100 SX66 Phone User Manual 101
6.6 WiFi Manager
WiFi Manager allows you to conveniently manage WiFi
Internet connections on your SX66 phone. You can man-
age the network setting and configure the device’s power
save mode to make optimal use of the battery under the
WiFi networking environment. WiFi Manager is designed
to work with the existing 802.11b devices such as access
points or routers. To run the WiFi Manager with your device,
you will need to have access to broadband Internet and the
necessary access point or router that emits WiFi signals. If
you do not have access to broadband Internet, consult with
your ADSL or DSL Internet service provider before running
this application.
If you want to set up a corporate wireless LAN, please visit
www.siemens-mobile.com/SX66 for detailed instructions.
Checking for WiFi signal
You can check if your device has access to a WiFi channel
signal before opening WiFi manager from the following:
n Today Screen : Open the Today Screen. If the device
has detected a WiFi network connection, the W icon
is shown on the top right, and a WiFi icon is shown on
the bottom right.
n Wireless Manager : Select Wireless Manager from
the Programs menu. Tap on the WiFi icon to access
a channel.
The availability and range of your device’s WiFi signals
may depend on the number, thickness and location of
walls, ceilings or other objects that the wireless signal must
pass through.
Turning on WiFi:
To use WiFi on your SX66 Phone, you need to turn on the
internal WiFi antenna on your device:
A W is shown if your SX66
has detected a WiFi con-
nection.