Storage maintenance – Stamina Products 55-1537C User Manual
Page 15
15
STORAGE
MAINTENANCE
Check the angle adjustment tube, traction bars, ball pins, pivot arms, cushion bed, heel holders, foam
pads, spring pin, and warning label for
damage and wear.
Replace damaged and worn components immediately and/or keep the equipment out of use until repairs
are complete.
1.
2.
The safety level of the
Elite Inversion System
can be maintained only if it is examined regularly for
damage and wear.
The
Elite Inversion System
is designed to fold for easy storage. You can store
your
Elite Inversion System
as illustrated. Please follow the following process:
When folding and unfolding the
Elite Inversion System,
keep all children away from the
Elite Inversion System
and make sure your hands are clear of any folding or pinch point.
Lowest
Adjustment Hole
1.
WARNING:
3.
2.
STEP 1:
Loosen
LOCKING KNOB(36)
and pull out the
SPRING PIN(35).
Now, slide the
HEIGHT ADJUSTMENT
BEAM(10)
into the
MAIN FRAME(
92
)
and lock in the lowest
adjustment hole. Refer to illustration 1.
STEP 2:
Remove the
PULL PINS(86)
from the
ANGLE
ADJUSTMENT BARS(85).
Swing the
NYLON BED(37)
down to about the same place as the Rear Frame and lock in
position by inserting the
PULL PINS(86)
into the second
adjustment holes in the
ANGEL ADJUSTMENT BARS(85)
above the
SUPPORT SLEEVE(84).
Refer to illustration 2.
STEP 3:
Remove the
LONG BALL PINS(46)
from the
REAR FRAMES(2, 3).
Fold the Front Frame close to the
Rear Frame as Illustration 3 shows. Insert the
LONG BALL
PINS(46)
back into the
REAR FRAMES(2, 3)
to lock the
Elite Inversion System
in the folded position.
Insert the PULL PINS(86)
into the second
adjustment holes.