How to use the remove control – Soleus Air 10 User Manual
Page 11
Advertising
HOW TO USE THE REMOVE CONTROL
For good receive, the distance between
operator and the unit no more than 5
meters.
Point the remote control
towards
the units signal receiver window
and pres s the des ired button. A
beep will sound when the unit re-
ceives the signal.
blocks the signal receiver window.
CAUTION
its operation. If necessary
, close the curtains to block out the sunlight.
VCRs or other equipment used in the same room.
remote control from moisture and shock which can discolor or damage it.
11
Advertising
This manual is related to the following products: