Sony Ericsson GM47 - Manual (Page 196)

GM47/GM48 INTEGRATOR’S MANUAL
196
LZT 123 7263 R1C
Triggering an Input:
Checking an Input Trigger:
AT Command Response Comment
AT*E2IO=4,“I1”,1 The TE is requesting to trigger
Input 1
OK The MS responds OK because
the operation has been
performed
AT*E2IO=4,“I4”,0 The TE is requesting to not
trigger Input 4
OK The MS responds OK because
the operation has been
performed
*E2IO:4,“I1”,1
OK
An event has occurred. The
input 1 has triggered on
changing the input to logic
value 1
AT Command Response Comment
AT*E2IO=5,“I1” The TE is requesting the trigger
state of the Input 1
*E2IO=5,“I1”,1
OK
The MS responds that I1 has its
trigger active