Sony Ericsson GM47 - Manual (Page 118)

GM47/GM48 INTEGRATOR’S MANUAL
118
LZT 123 7263 R1C
Unsolicited Result Codes:
+CKEV: <key>,<press>
+CIEV: <ind>,<value>
3.25 AT+CPAS Phone Activity Status
Returns the activity status <pas> of the ME. It can be used to interrogate
the ME before requesting action from the phone.
When the command is executed without the <mode> argument, the
command returns <pas> values from 0 to 128 (for supported values see
table below). When, on the other hand, the command is executed with
the <mode> argument set to 1, the command may return Ericsson
specific <pas> values from 129 to 255 (for supported values see the
table below).
<ind> Description
0 No indicator event reporting
1 Indicator event reporting using result code +CIEV:
<ind>,<value>. <ind> indicates the indicator order number
(as specified for +CIND) and <value> is the new value of
indicator. Only those indicator events, which are not
caused by +CIND shall be indicated by the TA to the TE
<bfr> Description
0 TA buffer of unsolicited result codes defined within this
command is cleared when <mode> 1...3 is entered
Description Command Possible Responses
Execute Phone Activity
Status
AT+CPAS[=<mode>] • +CPAS: <pas>
• +CME ERROR <err>
• OK
• ERROR
Show if the command
is supported
AT+CPAS=? • +CPAS:
(list of supported
<pas>s)
• +CME ERROR <err>
• OK
• ERROR