Sony Ericsson GM47 - Manual (Page 163)

6. DATA - GPRS
163
LZT 123 7263 R1C
6.6 AT+CGPADDR Show PDP Address
Returns a list of PDP addresses for the specified context identifiers. The
test command returns a list of defined <cid>s.
Description Command Possible Responses
Show PDP addresses
for specified CIDs
+CGPADDR=[<cid>
[,<cid> [,…]]]
• +CGPADDR:
<cid>,<PDP_addr>
[<CR><LF>+CGPAD
DR:
<cid>,<PDP_addr>
[...]]
• OK
• ERROR
Show if the command
is supported
+CGPADDR=? • +CGPADDR: (list of
defined <cid>s)
• OK
• ERROR
<cid> Description
Integer type Parameter which specifies a particular PDP context
definition (see +CGDCONT command). If no <cid> is
specified, the addresses for all defined contexts are
returned
<PDP_address> Description
String type A string that identifies the MS in the address space
applicable to the PDP. The address may be static or
dynamic. For a static address, it will be the one set by
the +CGDCONT command when the context was
defined. For a dynamic address it will be the one
assigned during the last PDP context activation that
used the context definition referred to by <cid>.
<PDP_address> is omitted if none is available