Sony Ericsson GM47 - Manual (Page 166)

GM47/GM48 INTEGRATOR’S MANUAL
166
LZT 123 7263 R1C
6.8 AT+CGQREQ Quality of Service Profile (Requested)
Allows the TE to specify a quality of service profile that is used when
the MS sends an activate PDP context request message to the network.
8 10000 (~22bits/s)
9 20000 (~44bits/s)
10 50000 (~111bits/s)
11 100000 (~0.22kbits/s)
12 200000 (~0.44kbits/s)
13 500000 (~1.11kbits/s)
14 1000000 (~2.2kbits/s)
15 2000000 (~4.4kbits/s)
16 5000000 (~11.1kbits/s)
17 10000000 (~22kbits/s)
18 20000000 (~44kbits/s)
31 50000000 (~111kbits/s)
<mean> Description
Description Command Possible Responses
Set quality
of service
profile
+CGQREQ=[<cid>
[,<precedence>
[,<delay>
[,<reliability>
[,<peak>
[,<mean>]]]]]]
• +CME ERROR: <err>
• OK
• ERROR
Show the
current
setting
+CGQREQ? • +CGQREQ: <cid>, <precedence>,
<delay>, <reliability>, <peak>,
<mean>[<CR><LF>+CGQREQ:
<cid>, <precedence>, <delay>,
<reliability>, <peak>, <mean>[…]]
• OK
• ERROR
Show if the
command
is supported
+CGQREQ=? • +CGQREQ: <PDP_type>,
(list of supported <precedence>s),
(list of supported <delay>s),
(list of supported <reliability>s),
(list of supported <peak>s),
(list of supported <mean>s)
[<CR><LF>+CGQREQ: <PDP_type>,
(list of supported <precedence>s),
(list of supported <delay>s),
(list of supported <reliability>s),
(list of supported <peak>s),
(list of supported <mean>s)[…]]
• OK
• ERROR