14 at+cops operator selection, 14 at+cops, Operator selection – Sony Ericsson GM47 User Manual
Page 228

GM47/GM48 INTEGRATOR’S MANUAL
228
LZT 123 7263 R1C
13.14 AT+COPS Operator Selection
Forces an attempt to select and register the GSM network operator.
Description
Command
Possible Responses
Request operator
selection
AT+COPS=[<mode>
[,<format>
[,<oper>]]]
• +CME ERROR <err>
• OK
• ERROR
Show the current
setting
AT+COPS?
• +COPS:
<mode>[,<format>,
<oper>]
• +CME ERROR <err>
• OK
• ERROR
Show if the command
is supported
AT+COPS=?
• +COPS: list of supported
(<stat>,long
alphanumeric <oper>,
short alphanumeric
<oper>,numeric
<oper>)s
• +CME ERROR <err>
• OK
• ERROR
<mode>
Description
0
Automatic (<oper> field is ignored)
1
Manual (<oper> field present)
3
Set only <format> (for read command +COPS?), do not
attempt registration/de-registration (<oper> field is
ignored); this value is not applicable in read command
response
4
Manual/automatic (<oper> field present); if manual
selection fails, automatic mode (<mode>=0) is entered
<format>
Description
0
Automatic (<oper> field is ignored)
2
Numeric <oper>
<oper>
Description
string type
Format determined by the <format> setting
<stat>
Description
0
Unknown
1
Available
2
Current
3
Forbidden