13 at+cmgd delete message, Common for both pdu and text modes, 14 at+csdh show text mode parameters – Sony Ericsson GM47 User Manual
Page 280: Only applicable to text mode, 13 at+cmgd, Delete message, 14 at+csdh, Show text mode parameters

GM47/GM48 INTEGRATOR’S MANUAL
280
LZT 123 7263 R1C
15.13 AT+CMGD Delete Message
Common for both PDU and Text modes
Deletes message from preferred message storage <mem1> location
<index>. If deleting fails, final result code +CMS ERROR: <err> is
returned. Test command shows the valid memory locations.
15.14 AT+CSDH Show Text Mode Parameters
Only Applicable to Text Mode
Controls whether detailed header information is shown in text mode
result codes.
Description
Command
Possible Responses
Delete message
AT+CMGD=<index>
• +CMS ERROR: <err>
• OK
• ERROR
Show if the command
is supported
AT+CMGD=?
• OK
• ERROR
<index>
Description
Integer type
Value in the range of location numbers supported by the
associated memory
Description
Command
Possible Responses
Set the show text
mode
AT+CSDH=[<show>]
• +CME ERROR: <err>
• OK
Show the current
setting
AT+CSDH?
• +CSDH: <show>
• +CME ERROR: <err>
Show if the command
is supported
AT+CSDH=?
• +CSDH: (list of
supported <show>s)
• OK
• +CME ERROR: <err>
<show>
Description
0
Do not show header values defined in commands
AT+CSCA and AT+CSMP (<sca>, <tosca>, <fo>, <vp>,
<pid> and <dcs>) nor <length>, <toda> or <tooa> in
+CMT, +CMGL, +CMGR result codes for SMS-DELIVERs and
SMS-SUBMITs in text mode; for SMS-COMMANDs in +CMGR
result code, do not show <pid>, <mn>, <da>, <toda>,
<length> or <cdata>
1
Show the values in result codes