Sony Ericsson GM47 - Manual (Page 326)

GM47/GM48 INTEGRATOR’S MANUAL
326
LZT 123 7263 R1C
+CLIP: <number>,<type>
Example
AT+CLIP=1
OK
RING
+CLIP: “07747008670”,129,,,“Matt L”,0
18.15 AT+CLIR Calling Line Identification Restriction
This command refers to CLIR-service according to GSM 02.81 that
allows a calling subscriber to enable or disable the presentation of the
CLI to the called party when originating a call.
Set command overrides the CLIR subscription (default is restricted or
allowed) when temporary mode is provisioned as a default adjustment
for all following outgoing calls. Using the opposite command can
revoke this adjustment. If this command is used by a subscriber without
provision of CLIR in permanent mode the network will act according
GSM 02.81.
The setting shall be per logical channel.
<number> Description
String type String type phone number of format specified by <type>
<type> Description
Integer format Type of address octet in integer (refer to GSM 04.08 sub-
clause 10.5.4.7)
Description Command Possible Responses
Request calling line
identification restriction
AT+CLIR=[<n>] • +CME ERROR <err>
• OK
• ERROR
Show the current
setting
AT+CLIR? • +CLIR: <n>,<m>
• +CME ERROR <err>
• OK
• ERROR
Show if the command
is supported
AT+CLIR=? • +CLIR: (list of supported
<n>s)
• +CME ERROR <err>
• OK
• ERROR