Changing the resolution, Place the originals, Select settings in the touch panel – Sharp TINSE4377FCZZ User Manual
Page 104: The side to be scanned must be face up
102
CHANGING THE RESOLUTION
You can select the resolution as appropriate for the original type.
This section explains how to set the resolution to "300X300dpi", which
creates a clearer image than the default resolution.
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Resolution] key.
(2) Touch the [300X300dpi]
key.
(3) Touch the [OK] key.
3
Select the destination and
then press the [START]
key.
The side to be scanned must be face up!
Auto
Auto
File
Quick File
Address Review
Send Settings
Address Entry
Address Book
USB Mem. Scan
Fax
Internet Fax
PC Scan
Special Modes
Color Mode
File Format
Resolution
Exposure
Original
Scan:
Scan
Send:
200X200dpi
Scan/Resolution
OK
300X300dpi
200X200dpi
100X100dpi
400X400dpi
600X600dpi
8½x11
Mono2
(1)
(3)
(2)
Cancel scanning
mxb401_us_qck.book 102 ページ ２００９年１月８日 木曜日 午後２時１分