Samsung DVD-M208K - Manual (Page 19)

37
CHANGING SETUP MENU
Setting Up the Display Options
RETURN ENTER
DISPLAY OPTIONS
1 TV Aspect 4:3 L-Box
2 Still Mode Auto
3 Screen Massages On
4 Front Display Auto Dim
5 Black Level Off
6 Quasi-PAL On
7 SCART Output RGB
1 1 With the unit in Stop mode, press the SETUP
button.
2 2 Use the UP/DOWN buttons to select DISPLAY OPTIONS.
Then press the ENTER button.
3 3 Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1 . 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2 . 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3 . 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display
small text clearer.
1 . Field : Select this feature when the screen shakes in the Auto mode.
2 . Frame : Select this feature when you want to see small letters more clearly
in the Auto mode.
3 . Auto : When selecting Auto, Field/Frame mode will be automatically converted.
Screen Messages
Use to turn on-screen messages On or Off.
Front Display
Adjust the brightness of the unit’s front panel display.
1
. Bright : Makes the Front Panel Display bright.
2 . Dim : Makes the Front Panel Display dim.
3 . Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
Black Level
Adjusts the brightness of the screen.(On/Off)
Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by Quasi-PAL mode.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
36
Setting Up the Audio Options
1 1 With the unit in Stop mode, press the SETUP
button.
2 2 Use the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
3 3 Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Dolby Digital Out
1 . PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2
. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N N N N O O O O TT TT EE EE : Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1 . On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2 . Off : Doesn’t output digital signal.
2X Scan Audio
1 . On : Turns 2X audio on.
2 . Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
MPEG-2 Digital Out
1 . PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2
. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the Digital
Audio Output.
Dynamic Compression
1 . On : To select dynamic compression.
2 . Off : To select the standard range.
RETURN
AUDIO OPTIONS
1 Dolby Digital Out PCM
2 MPEG-2 Digital Out PCM
3 DTS Off
4 Dynamic Compression On
5 2X Scan Audio Off
6 Speaker
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Certain audio features of this product manufactured under a license from Deeper Products, Inc.
Spatializer ® and circle-in-square device are trademarks owned by Deeper Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
M208K(Asia) 4/20/01 9:24 AM Page 36