Sanyo VPC-CG65PX. - Manual (Page 113)

99
English
COPY DATA
5
Press the SET button.
h The screen to select the type of
copy appears.
h The copy source image is shown in
the background on the screen.
COPY SINGLE:
Copy the data for one image.
COPY ALL:
Copy all the data from the copy source
to the copy destination.
6
Select the desired type of copy.
<When selecting “COPY SINGLE”>
1 Toggle the SET button to the left or right to display the image you
wish to copy.
2 Toggle the SET button up or down to select “COPY SINGLE”.
<When selecting “COPY ALL”>
1 Toggle the SET button up or down to select “COPY ALL”.
7
Press the SET button.
h The files are copied.
COPY ALL
COPY SINGLE
CARD INT MEM
OK