Samson 4060/4120 - Manual (Page 13)

13
Specifications
1. Rated Output Power, per channel
At 1 kHz, 4 ohm, .<0.05% THD+N
Model 4120 120 W
Model 4060 60 W
At 1 kHz, 4 ohm, 1% THD+N
Model 4120 150 W
Model 4060 80 W
At 1 kHz, 8 ohm, <0.05% THD+N
Model 4120 120 W
Model 4060 60 W
At 1 kHz, 8 ohm, 1% THD+N
Model 4120 130W
Model 4060 64 W
2. Typical Distortion, per channel
THD+N (80 kHz LPF @ 1 kHz, rated output power) .005%
IMD (SMPTE 4:1, 60 Hz & 7 kHz @ rated output power) .015%
3. Signal To Noise Ratio
(22 Hz - 22 kHz bandwidth @ dB below rated output power) 95 dB
4. Frequency Response 20 Hz - 50 kHz, 0 - 3 dB
5. Input Sensitivity +4 dBu to achieve rated power
(Level control set to maximum)
6. Crosstalk (adjacent channels) -70 dB, 1 kHz
7. Output DC Offset Voltage 0 ± 50 mV, DC Servo Controlled
8. Dimensions (without rack ears) 17.5 in (w) x 10.75 (d) x 3.25 (h)
444 mm (w) x 273 (d) x 82.5 (h)
9. Weight
Model 4120 29.5 lbs • 13.4 kg
Model 4060 25 lbs • 11.3 kg